Deep groove ball bearings are among the most widely used type of bearing in the world.
Deep groove ball bearing is versatile. Deep groove ball bearing operates at high speeds and can carry radial and axial loads. They have low friction and are optimized for low noise and low vibration which enables high rotational speeds. Deep groove ball bearings are characterized by having deep raceway grooves in which the inner and outer rings have circular arcs of slightly larger radius than that of the balls.
6000 2z Deep Groove Ball Bearing a premium quality Ball Bearings. We provide qualitative range of Ball Bearings. All Deep Groove Ball Bearing, mm are manufactured by using quality assured material and advanced techniques, which make them up to the standard in this highly challenging field. The materials utilized to manufacture 6009 2z Deep Groove Ball Bearing, mm, are sourced from the most reliable and official Ball Bearings vendors, chosen after performing detailed market surveys. Thus, products are widely acknowledged in the market for their high quality. We are dedicatedly involved in providing an excellent quality array of Ball Bearings. Single row deep groove ball bearings with filling slots
Single row deep groove ball bearings are used in a wide variety of applications, they are simple in design, non-separable, suitable for high speeds and are robust in operation, and need little maintenance. Deep raceway grooves and the close conformity between the raceway grooves and the balls enable deep groove ball bearings to accommodate axial loads in both directions, in addition to radial loads.
Single row deep groove ball bearings are manufactured as open type (unsealed), sealed and shielded, the most popular sizes of deep groove ball bearings are also produced in sealed versions with shields or contact seals on one or both sides, the bearings with shields or seals on both sides are lubricated for life and are maintenance free. A sealed bearings seals has contact on the bearings inner and outer, a shielded bearings shield has contact on the outer only, and Shielded bearings are primarily intended for applications where the inner ring rotates. If the outer ring rotates, there is a risk that the grease will leak from the bearing at high speeds.